Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.

Model: Aprilia Tuono V4 1100rr
Part: Wheel

Video tutorial

The instructions in this guide will show us how to disassemble and remove the rear wheel of the Aprilia Tuono V4 1100 Factory motorcycle. First, let's put the motorcycle on a stand and begin to lift the rear wheel off the ground using the appropriate rear stand, first unscrewing the nut of the wheel's central axle; then we disconnect the brake caliper from the disc, followed by disconnecting the drive chain to remove the rear wheel, as shown in the video.

At this point, we can make any necessary repairs or replace the tire, finally reassembling and adjusting the wheel.


Posted on 24 November 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in an Aprilia Tuono V4 1100 RR?
How to Change the Engine Oil in an Aprilia Tuono V4 1100 RR?
Tuono V4 1100rr As seen in this tutorial, changing the engine oil in an Aprilia Tuono V4 1100 RR is an extremely simple and quick operation. First, wait for the engi…
How to remove the front wheel of the Aprilia Tuono V4 Factory.
How to remove the front wheel of the Aprilia Tuono V4 Factory.
Tuono V4 1100rr Today we will discover the instructions that will allow us to disassemble and remove the front wheel of the Aprilia Tuono V4 Factory motorcycle. Firs…
How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?
How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?
Tuono V4 1100rr In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proce…

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos