Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front wheel of the Aprilia Tuono V4 Factory.

Model: Aprilia Tuono V4 1100rr
Part: Wheel

Video tutorial

Today we will discover the instructions that will allow us to disassemble and remove the front wheel of the Aprilia Tuono V4 Factory motorcycle. First, we place the motorcycle on a stand and begin to lift the rear wheel off the ground using the appropriate stand; then we unscrew the central axle of the wheel with a socket wrench, and subsequently unscrew the fastening screws of the brake calipers to remove them from the discs, as shown in the video.

At this point, we pull out the front wheel, replacing the tire if necessary; we then reassemble the wheel and the front brake calipers.


Posted on 20 December 2025 by ScegliAuto


Related tutorials

How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
Tuono V4 1100rr The instructions in this guide will show us how to disassemble and remove the rear wheel of the Aprilia Tuono V4 1100 Factory motorcycle. First, let'…
How to Remove the Rear Wheel of the Aprilia Tuono V4
How to Remove the Rear Wheel of the Aprilia Tuono V4
Tuono V4 1100rr Below are the steps to remove and replace the rear wheel and tyre of the Aprilia Tuono V4. First, place your motorcycle on a stand and lift the rear …
How to Remove and Replace the Rear Wheel of the Aprilia Tuono V4
How to Remove and Replace the Rear Wheel of the Aprilia Tuono V4
Tuono V4 1100rr In this video tutorial, you will learn how to remove and replace the rear wheel or tyre of the Aprilia Tuono V4, following the instructions below. Fi…

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos