Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of the Aprilia Tuono V4

Model: Aprilia Tuono V4 1100rr
Part: Wheel

Video tutorial

Below are the steps to remove and replace the rear wheel and tyre of the Aprilia Tuono V4. First, place your motorcycle on a stand and lift the rear wheel off the ground using the appropriate stand; then use a socket wrench with an extension to unscrew and remove the central axle of the wheel, as shown in the video.

At this point, disconnect the drive chain from the sprocket, and detach the brake caliper from the disc to remove the wheel; apply the reverse procedure for reassembly!


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
Tuono V4 1100rr The instructions in this guide will show us how to disassemble and remove the rear wheel of the Aprilia Tuono V4 1100 Factory motorcycle. First, let'…
How to Remove and Replace the Rear Wheel of the Aprilia Tuono V4
How to Remove and Replace the Rear Wheel of the Aprilia Tuono V4
Tuono V4 1100rr In this video tutorial, you will learn how to remove and replace the rear wheel or tyre of the Aprilia Tuono V4, following the instructions below. Fi…
How to remove the front wheel of the Aprilia Tuono V4 Factory.
How to remove the front wheel of the Aprilia Tuono V4 Factory.
Tuono V4 1100rr Today we will discover the instructions that will allow us to disassemble and remove the front wheel of the Aprilia Tuono V4 Factory motorcycle. Firs…

How to Change the Transmission Oil on a Honda PCX 125 Scooter?

In this tutorial, you will learn how to change the transmission oil on a Honda PCX 125 scooter, a very simple and quick operation. First, ensure the engine is sufficiently cool for safe operation, then position a container beneath the transmission casing, locate both the drain bolt and the fill bolt, and unscrew them using a 12mm socket. Allow all the oil in the system to drain out, tighten the lower bolt, and add new oil using a large syringe. Finally, tighten the upper bolt.

Watch the video!


by ScegliAuto

More videos