Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Rear Wheel of the Aprilia Tuono V4

Model: Aprilia Tuono V4 1100rr
Part: Wheel

Video tutorial

In this video tutorial, you will learn how to remove and replace the rear wheel or tyre of the Aprilia Tuono V4, following the instructions below. First, lift the motorcycle with the rear stand and begin by removing the brake caliper, loosening the bolts with a socket spanner; then, unscrew the central axle of the wheel to slide it out, as shown in the video.

At this point, remove the rear wheel by disconnecting the chain, and replace the tyre if necessary; all that’s left is to refit everything!


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of the Aprilia Tuono V4
How to Remove the Rear Wheel of the Aprilia Tuono V4
Tuono V4 1100rr Below are the steps to remove and replace the rear wheel and tyre of the Aprilia Tuono V4. First, place your motorcycle on a stand and lift the rear …
How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
Tuono V4 1100rr The instructions in this guide will show us how to disassemble and remove the rear wheel of the Aprilia Tuono V4 1100 Factory motorcycle. First, let'…
How to install the rear wheel of the Aprilia Tuono V4 1100RR
How to install the rear wheel of the Aprilia Tuono V4 1100RR
Tuono V4 1100rr Let's briefly go over the instructions that will allow us to install the rear wheel of the Aprilia Tuono V4 1100RR in simple steps. First, we will in…

How to Change the Transmission Oil on a Honda PCX 125 Scooter?

In this tutorial, you will learn how to change the transmission oil on a Honda PCX 125 scooter, a very simple and quick operation. First, ensure the engine is sufficiently cool for safe operation, then position a container beneath the transmission casing, locate both the drain bolt and the fill bolt, and unscrew them using a 12mm socket. Allow all the oil in the system to drain out, tighten the lower bolt, and add new oil using a large syringe. Finally, tighten the upper bolt.

Watch the video!


by ScegliAuto

More videos