Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Rs 125
Part: Engine oil

How to change the engine oil on an Aprilia Rs 125? Follow this guide to proceed. Position the motorcycle on the original stand, unscrew the securing screws of the side fairings and under the motorcycle (to access the cap in the oil sump). Use a spanner to unscrew the oil sump bolt (drain the fluid into a container for disposal). Top up with new fluid in the engine and close with the plastic cap. Refit the previously removed fairings under the motorcycle and on the sides. Start the motorcycle after maintenance and test its operation.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Transmission Oil on an Aprilia RS 125
How to Replace the Transmission Oil on an Aprilia RS 125
Rs 125 Let’s go through the steps to replace the transmission oil while performing routine maintenance on the Aprilia RS 125. First, place the bike on a sta…
How do you replace the motor oil of the Aprilia RS 125?
How do you replace the motor oil of the Aprilia RS 125?
Rs 125 The oil change of the Aprilia RS 125 can be done by loosening the drain plug located in the central lower part of the motorcycle: once the plug has b…
How to replace the crankshaft oil seal of the Aprilia RS 125
How to replace the crankshaft oil seal of the Aprilia RS 125
Rs 125 The following steps will show us how to disassemble and replace the crankshaft oil seal of the Aprilia RS 125 motorcycle. First, we put the motorcycl…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos