Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the gearbox oil of the Aprilia RS 125?

Model: Aprilia Rs 125
Part: Transmission fluid

Video tutorial

This guide will briefly show you how to perform the routine maintenance service by changing the gearbox oil of the Aprilia RS 125 motorcycle. First, place your motorcycle on a stand and start unscrewing the oil drain bolt found under the transmission, allowing the oil to drain into a container for about ten minutes; then unscrew the filler cap to let the oil flow out more quickly.

At this point, top up with the new transmission oil suitable for your engine, filling up to the maximum level mark!


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Oil and Coolant of the Aprilia RS 125
How to Replace the Gear Oil and Coolant of the Aprilia RS 125
Rs 125 Today, let's look at how to replace the gear oil and coolant of the Aprilia RS 125 motorcycle, following the instructions below. First, unscrew the o…
How to Replace the Gearbox Oil of the Aprilia RS 125
How to Replace the Gearbox Oil of the Aprilia RS 125
Rs 125 Follow this brief and simple guide for instructions on how to replace the gearbox oil of the Aprilia RS 125 two-stroke motorcycle. First, place your …
Oil and Engine Filter Change on Aprilia Rs 125
Oil and Engine Filter Change on Aprilia Rs 125
Rs 125 Before starting the oil change, always start the engine and let it run for a few minutes to warm the circulating oil, reducing its viscosity and aidi…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos