Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Engine Filter Change on Aprilia Rs 125

Model: Aprilia Rs 125
Part: Engine oil

Video tutorial

Before starting the oil change, always start the engine and let it run for a few minutes to warm the circulating oil, reducing its viscosity and aiding its subsequent removal. For the same reason, I also recommend unscrewing the cap from which you will add oil at the end, allowing air to flow into the system.

As shown in the video, unscrew the bolt located under the engine compartment and collect the used oil in a container. While it drains, unscrew the oil filter and replace it with the new one you purchased.

Add the same amount of oil that was drained, and you’re done.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the Aprilia RS 125?
How do you replace the motor oil of the Aprilia RS 125?
Rs 125 The oil change of the Aprilia RS 125 can be done by loosening the drain plug located in the central lower part of the motorcycle: once the plug has b…
How to Replace the Gearbox Oil of the Aprilia RS 125
How to Replace the Gearbox Oil of the Aprilia RS 125
Rs 125 Follow this brief and simple guide for instructions on how to replace the gearbox oil of the Aprilia RS 125 two-stroke motorcycle. First, place your …
How to change the gearbox oil of the Aprilia RS 125?
How to change the gearbox oil of the Aprilia RS 125?
Rs 125 This guide will briefly show you how to perform the routine maintenance service by changing the gearbox oil of the Aprilia RS 125 motorcycle. First, …

How to remove the front wheel of the KTM Super Adventure 1290

In this video tutorial, you will learn how to remove and replace the front wheel of the KTM Super Adventure 1290 motorcycle, following the instructions provided below. First, place your motorcycle on the centre stand and begin to unscrew the fixing bolts of the front brake calipers; once removed, unscrew the central axle of the wheel to remove it from its hub, as shown in the video. At this point, if necessary, replace the tyre and refit the front wheel; finally, reinstall the brake calipers, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos