Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on an Aprilia Sr 150

Model: Aprilia Sr 150
Part: Air filter

Video tutorial

How to replace the engine air filter on an Aprilia Sr 150 scooter? Follow this guide to proceed with the replacement. Position the scooter on the centre stand, then use a screwdriver to remove the screws securing the air filter container.

After removing the securing screws, uncover the lid and remove the air filter. Install a new one if damaged or reposition the old one after cleaning it (use an air compressor).

Finally, close the air filter container and tighten the screws with the screwdriver.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on an Aprilia SR 150?
How to Replace the Air Filter on an Aprilia SR 150?
Sr 150 You can replace the air filter on the Aprilia SR 150 by loosening the screws that secure the cover on the left side of the rear wheel, just above the…
How to Replace the Air Filter of the Aprilia SR 150?
How to Replace the Air Filter of the Aprilia SR 150?
Sr 150 To replace the air filter of the Aprilia SR 150, open the cover located immediately above the transmission cover, near the rear wheel. Once the cover…
How to Replace the Air Filter on the Aprilia SR 150 Scooter?
How to Replace the Air Filter on the Aprilia SR 150 Scooter?
Sr 150 As shown in this tutorial, replacing the air filter on the Aprilia SR 150 scooter is an extremely simple and quick task. Before proceeding, wait for …

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos