Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Aprilia SR 150 Scooter?

Model: Aprilia Sr 150
Part: Air filter

Video tutorial

As shown in this tutorial, replacing the air filter on the Aprilia SR 150 scooter is an extremely simple and quick task. Before proceeding, wait for the engine to cool completely to ensure safety.

Start by going to the left side of the scooter, then undo all the screws around the perimeter of the airbox. Next, remove the cover, take out the old filter, and clean the inside of the housing from any dirt residue.

Finally, insert the new filter in the correct orientation, reposition the cover, and tighten all the screws securely.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on an Aprilia Sr 150
How to Replace the Air Filter on an Aprilia Sr 150
Sr 150 How to replace the engine air filter on an Aprilia Sr 150 scooter? Follow this guide to proceed with the replacement. Position the scooter on the cen…
How to Replace the Air Filter of the Aprilia SR 150?
How to Replace the Air Filter of the Aprilia SR 150?
Sr 150 To replace the air filter of the Aprilia SR 150, open the cover located immediately above the transmission cover, near the rear wheel. Once the cover…
How to Replace the Headlamp Bulb on the Aprilia SR 150
How to Replace the Headlamp Bulb on the Aprilia SR 150
Sr 150 This guide outlines the steps to remove and replace the headlamp bulb with an LED type on the Aprilia SR 150 scooter. First, remove the front shield …

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos