Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Air Filter on an Aprilia SR150 Scooter

Model: Aprilia Sr150
Part: Air filter

Video tutorial

This guide describes how to replace the air filter on an Aprilia SR150 scooter. Obtain the Aprilia air filter part no. 91750. Position the scooter on its centre stand.

The air filter housing is located on the left side of the engine casing. Using a Phillips screwdriver, remove the seven screws securing the filter housing cover.

Take off the cover and unscrew the two screws located on the sides of the air filter. Blow compressed air into the filter housing and replace the air filter, ensuring the correct orientation.

Reassemble everything in reverse order.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

Sr150 Replacing the front bulbs on the Aprilia SR150 is very simple, although the headlamp is removed along with the entire front fairing of the scooter. T…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos