Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Replacing the front bulbs on the Aprilia SR150 is very simple, although the headlamp is removed along with the entire front fairing of the scooter. To replace a bulb, start by unscrewing all the screws securing the fairing, both on the rider's side and at the lower front, above the wheel. Once done, the fairing (with the headlamp attached) will come out of its seat, and by disconnecting the connectors, you can completely remove it. Unscrew the six bolts securing the headlamp to the fairing, remove the rubber cover behind the bulb, and replace the bulb.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Air Filter on an Aprilia SR150 Scooter
Replacement of the Air Filter on an Aprilia SR150 Scooter
Sr150 This guide describes how to replace the air filter on an Aprilia SR150 scooter. Obtain the Aprilia air filter part no. 91750. Position the scooter on…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos