Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Rs 125
Part: Engine

This is a job for experienced mechanics. Before starting, drain the coolant by unscrewing the designated screw located underneath the bike. Remove the side fairings simply by unscrewing the screws that secure them. Then, remove the exhaust as shown in the video, first taking off the end can and then the main section located underneath the bike. Now, move on to the fuel tank by first removing the side panels and the upper fairing. At this point, remove the exhaust valve, the carburettor, the filter, and everything that separates you from the cylinder. This can finally be removed.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cylinder and Piston of the Aprilia RS 125
How to Replace the Cylinder and Piston of the Aprilia RS 125
Rs 125 To replace the cylinder and piston of the Aprilia RS 125, first secure the bike on a stand and lift the fuel tank cover. Once you have access to the …
How do you disassemble the engine of the Aprilia RS 125?
How do you disassemble the engine of the Aprilia RS 125?
Rs 125 In order to disassemble the engine of the Aprilia RS 125, you will need to loosen the screws that attach it to the appropriate supports on the frame:…
How do you disassemble the engine of the Aprilia RS 125?
How do you disassemble the engine of the Aprilia RS 125?
Rs 125 The disassembly operation of the Aprilia RS 125 engine block is carried out by loosening the screws that fix it to its housing, then disconnecting al…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos