Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Unscrew the two screws that hold the mask in place, one more external and the other rather hidden, as shown in the video. Disconnect the mask and the connectors attached to it (headlights and indicators). At this point, with the mask and headlight in hand, remove the cover for the non-functioning light, take out the clips, unscrew the bulb, and replace it with the part you purchased. The main cover, located lower down, is for the dipped and main beam light. The small upper cover is for the position light. Good luck!

Updated on 17 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Headlamp Bulb on an Aprilia Dorsoduro
How to Replace the Front Headlamp Bulb on an Aprilia Dorsoduro
Dorsoduro 750 In this video tutorial, you will learn how to dismantle and replace the front headlamp bulb on an Aprilia Dorsoduro 750 in simple and quick steps. Fi…
How to Reset the "Service" Light on an Aprilia Dorsoduro 750
How to Reset the "Service" Light on an Aprilia Dorsoduro 750
Dorsoduro 750 Before you can begin, sit on the seat of your Aprilia Dorsoduro 750. Start by activating the instrument panel by turning the key in the ignition swit…
Replacing the Air Filter on the Aprilia Dorsoduro 750
Replacing the Air Filter on the Aprilia Dorsoduro 750
Dorsoduro 750 Below, you will see how to remove and replace the air filter on the Aprilia Dorsoduro 750 engine. First, place the stand on your bike and start unscr…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos