Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The process of disassembling and replacing the spark plugs of the Aprilia Dorsoduro 750 motorcycle engine is really very simple and only takes a few minutes. First of all, we put the motorcycle on the stand and start by removing the connector or spark plug wire of the first cylinder; on the opposite side we will find the other connector, as shown in the video. At this point we use a socket wrench with an extension to unscrew and remove the spark plug, replacing it with a new one (of the right type and with the same thread); we screw the spark plugs by hand and then tighten them gently with a wrench!

Posted on 20 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the muffler of the Aprilia Dorsoduro 750?
How do you replace the muffler of the Aprilia Dorsoduro 750?
Dorsoduro 750 In order to replace the exhaust of the Aprilia Dorsoduro 750, you need to loosen the screws that secure the component to its housing: this will be lo…
How do you replace the handlebar of the Aprilia Dorsoduro 750?
How do you replace the handlebar of the Aprilia Dorsoduro 750?
Dorsoduro 750 In order to replace the handlebar of the Aprilia Dorsoduro 750, you need to loosen the screws that secure the controls located on the sides, near the…
Replacing the Air Filter on the Aprilia Dorsoduro 750
Replacing the Air Filter on the Aprilia Dorsoduro 750
Dorsoduro 750 Below, you will see how to remove and replace the air filter on the Aprilia Dorsoduro 750 engine. First, place the stand on your bike and start unscr…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos