Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform an oil change on Aprilia SR 150

Model: Aprilia Sr 150
Part: Engine oil

Video tutorial

Follow these steps to replace the engine oil during the regular maintenance service on an Aprilia SR 150 scooter. First, position the scooter on its centre stand and remove the oil drain bolt located underneath the engine using a socket spanner; allow the old oil to drain into a container for about ten minutes.

Once drained, replace the drain bolt and open the filler cap with the dipstick; pour in the new oil of the correct type until it reaches the level indicated on the dipstick!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Change the Gear Oil on the Aprilia SR 150?
How to Change the Gear Oil on the Aprilia SR 150?
Sr 150 To change the gear oil on the Aprilia SR 150, loosen the drain plug located at the rear of the transmission casing: there will be two, and in this ca…
How to Change the Engine Oil of the Aprilia SR 150?
How to Change the Engine Oil of the Aprilia SR 150?
Sr 150 To change the engine oil of the Aprilia SR 150, loosen the drain plug located at the bottom of the bike. Once it is loosened, collect the used oil in…
How to Change the Engine Oil in an Aprilia SR 150 Scooter
How to Change the Engine Oil in an Aprilia SR 150 Scooter
Sr 150 In this tutorial, you will see how to change the engine oil in an Aprilia SR 150 scooter, a very simple and quick operation. First, ensure the engine…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos