Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial, you will learn how to change the engine oil as part of the regular maintenance service on an Aprilia SXM 125 enduro bike. First, position the stand on your bike and start by loosening the drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then remove the oil filter cap by unscrewing it with a socket spanner. At this point, replace the filter with a new one, inserting it correctly; pour in the new oil and fill it to the correct level!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Aprilia RX 125.
How to replace the engine oil and oil filter of the Aprilia RX 125.
Rx 125 Today's instructions will allow us to perform the routine maintenance service by replacing the engine oil and oil filter of the Aprilia RX 125 motorc…
How to Replace the Engine Oil and Oil Filter on an Aprilia RX 125
How to Replace the Engine Oil and Oil Filter on an Aprilia RX 125
Rx 125 Replacing the engine oil and oil filter means performing the routine maintenance service on your engine; in this case, we will see how to do it on th…
How to Change the Engine Oil and Oil Filter on an Aprilia RX 125
Rx 125 Here are the main instructions for performing routine maintenance by changing the engine oil and oil filter on the Aprilia RX 125 enduro bike. First,…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos