Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on an Aprilia RX 125

Model: Aprilia Rx 125
Part: Engine oil

Video tutorial

Replacing the engine oil and oil filter means performing the routine maintenance service on your engine; in this case, we will see how to do it on the Aprilia RX 125 enduro bike. First, place the bike on its stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one. At this point, unscrew the filler screw and pour in the correct amount of suitable engine oil.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on an Aprilia RX 125
Rx 125 Here are the main instructions for performing routine maintenance by changing the engine oil and oil filter on the Aprilia RX 125 enduro bike. First,…
How to replace the engine oil and oil filter of the Aprilia RX 125.
How to replace the engine oil and oil filter of the Aprilia RX 125.
Rx 125 Today's instructions will allow us to perform the routine maintenance service by replacing the engine oil and oil filter of the Aprilia RX 125 motorc…
How to Perform a Service on the Aprilia RX 125
How to Perform a Service on the Aprilia RX 125
Rx 125 Following these brief instructions, you will see how to perform the routine maintenance service by replacing the engine oil and oil filter on the Apr…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos