Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Aprilia RS 125?

Model: Aprilia Rs 125
Part: Battery

This video is currently unavailable

To replace the battery of the Aprilia RS 125, remove the fairing located just below the handlebars to access its underlying parts. Then, remove the bolts securing the coolant tank for easier access to the battery.

Now, disconnect the negative and positive terminals of the battery and slide it out of its housing. Once the old battery is removed, insert the new battery, connect it, and reassemble all previously removed parts.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How do you replace the battery of the Aprilia RS 125?
How do you replace the battery of the Aprilia RS 125?
Rs 125 It will be possible to replace the battery of the Aprilia RS 125 by loosening the screw that secures the seat to its housing: this screw will be loca…
How do you replace the battery of the Aprilia RS 125?
How do you replace the battery of the Aprilia RS 125?
Rs 125 To replace the battery of the Aprilia RS 125, you will need to loosen the screws that secure the side panels located near the fuel tank: once these p…
How to Replace the Battery in an Aprilia RS 125?
How to Replace the Battery in an Aprilia RS 125?
Rs 125 In this tutorial, you will see how to replace the battery in an Aprilia RS 125, a very simple and quick operation. Before proceeding, ensure that the…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos