Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in an Aprilia RS 125?

Model: Aprilia Rs 125
Part: Battery

Video tutorial

In this tutorial, you will see how to replace the battery in an Aprilia RS 125, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety.

Start by removing the seat, then unscrew the two rear bolts of the tank, the side ones, and finally the front ones, so you can lift the tank and access the battery. At this point, disconnect both terminals starting with the negative, unclip the securing strap, and remove the old battery.

To install the replacement, simply follow the reverse procedure.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Aprilia RS 125?
Rs 125 To replace the battery of the Aprilia RS 125, remove the fairing located just below the handlebars to access its underlying parts. Then, remove the b…
How do you replace the battery of the Aprilia RS 125?
How do you replace the battery of the Aprilia RS 125?
Rs 125 It will be possible to replace the battery of the Aprilia RS 125 by loosening the screw that secures the seat to its housing: this screw will be loca…
How do you replace the battery of the Aprilia RS 125?
How do you replace the battery of the Aprilia RS 125?
Rs 125 To replace the battery of the Aprilia RS 125, you will need to loosen the screws that secure the side panels located near the fuel tank: once these p…

How to Change the Engine Oil of an Aprilia Dorsoduro 750?

Changing the engine oil of an Aprilia Dorsoduro 750 requires attention and precision to ensure the engine functions correctly. First, ensure the bike is on a flat and stable surface, preferably using a centre stand or suitable support. The engine should be slightly warm to allow the oil to flow better, so start it for a few minutes and then turn it off. Locate the oil drain plug at the bottom of the engine and position a container to collect the old oil. Unscrew the plug using an appropriate spanner and let the oil drain completely. In the meantime, remove the filler cap to aid the flow. Once drained, replace the drain plug gasket if necessary, then screw it back on tightly. Proceed to pour in the new oil using a funnel to avoid spills, ensuring you adhere to the quantity and specification stated in the bike's manual. After filling, start the engine for a few minutes and check the level with the dipstick or indicator. Adjust if necessary and dispose of the used oil following local regulations.

Watch the video!


by ScegliAuto

More videos