Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carburettor from an Aprilia RS 125

Model: Aprilia Rs 125
Part: Carburetor

Video tutorial

Before you can begin, position your Aprilia RS 125 on the side stand. Start by removing the seat and fuel tank by undoing the fastening screws and disconnecting the fuel hose and electrical connector.

Then, you will also need to remove the air filter block by undoing the fastening screws and disconnecting the various hoses. Once done, undo the screws that secure the slide to the carburettor.

At this point, disconnect the hoses connected to the carburettor, then undo the fastening screw. Once you have completed this step, you can remove the carburettor, and the disassembly will be complete.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cylinder and Piston of the Aprilia RS 125
How to Replace the Cylinder and Piston of the Aprilia RS 125
Rs 125 To replace the cylinder and piston of the Aprilia RS 125, first secure the bike on a stand and lift the fuel tank cover. Once you have access to the …
Guide to Replacing the Starter Motor of the Aprilia RS 125
Rs 125 In this video tutorial, you will see how to disassemble and replace the starter motor of the Aprilia RS 125 motorcycle. First, place your motorcycle …
How to Replace the Spark Plug on an Aprilia RS 125
How to Replace the Spark Plug on an Aprilia RS 125
Rs 125 Before you begin, position your Aprilia RS 125 vertically. Start by removing the rider's seat using the key. Next, dismantle the fuel tank by unscrew…

How to change the engine oil in the Aprilia Tuono V4?

In this tutorial, you will learn how to change the engine oil in the Aprilia Tuono V4, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket spanner. Allow all the oil in the system to drain out, then unscrew the old filter and tighten both the new filter and the drain plug. At this point, simply pour the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos