Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will see how to disassemble and replace the starter motor of the Aprilia RS 125 motorcycle. First, place your motorcycle on the stand and start unscrewing the fixing screws of the starter motor using a crosshead screwdriver; then disconnect the electrical wiring that operates the starter motor, as shown in the video. At this point, install the new original starter motor, connecting the electrical wiring and securing it with its screws; tighten everything and check its operation!

Updated on 27 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Start the Engine of an Aprilia RS 125
How to Start the Engine of an Aprilia RS 125
Rs 125 Before starting, position your Aprilia RS 125 on its central stand. Begin by inserting the key into the ignition switch and turning it fully clockwis…
How do you replace the motor oil of the Aprilia RS 125?
How do you replace the motor oil of the Aprilia RS 125?
Rs 125 The oil change of the Aprilia RS 125 can be done by loosening the drain plug located in the central lower part of the motorcycle: once the plug has b…
How to replace the transmission chain of the Aprilia RS 125
How to replace the transmission chain of the Aprilia RS 125
Rs 125 Following these short and simple instructions, we will see the disassembly and replacement of the transmission chain of the Aprilia RS 125 motorcycle…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos