Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change the Rear Brake Fluid in the Aprilia Tuono 1000 R

Model: Aprilia Tuono 1000 R
Part: Brake fluid

Video tutorial

In this guide, find the instructions to change the brake fluid of the Aprilia Tuono 1000 R motorcycle in simple steps. First, unscrew the bleed screw found on the brake caliper using an 11 mm socket; then connect a tube to drain the fluid, pressing the rear brake pedal several times as shown in the video.

At this point, close the valve and open the brake fluid reservoir; pour in the new fluid and press the pedal until the fluid (the oil) is under pressure!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Change the Front Brake Fluid on an Aprilia Tuono 1000R
How to Change the Front Brake Fluid on an Aprilia Tuono 1000R
Tuono 1000 R Today's main steps will show you how to bleed and refill the front brake fluid on an Aprilia Tuono 1000R motorcycle. First, place the motorcycle on a…
How to replace the thermostat on the Aprilia Tuono 1000 R
How to replace the thermostat on the Aprilia Tuono 1000 R
Tuono 1000 R In today's tutorial, you will learn how to remove and replace the thermostat on the Aprilia Tuono 1000 R, following the instructions below. First, re…
How to Replace the Front Headlight Bulb of the Aprilia Tuono 1000
How to Replace the Front Headlight Bulb of the Aprilia Tuono 1000
Tuono 1000 R This guide outlines the steps to dismantle and replace the front headlight and its bulb on the Aprilia Tuono 1000 motorcycle. First, place the bike o…

How to Remove the Rear Wheel of the Triumph Tiger 800

To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the swingarm. Once these two nuts are removed, unscrew the bolts that secure the rear brake caliper, detaching it from the disc; you will also need to move the chain from the corresponding sprocket. When all these components have been removed, it will be possible to completely detach the wheel, allowing you to insert a new replacement part, reassembling all previously removed components.

Watch the video!


by ScegliAuto

More videos