Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Brake Fluid on an Aprilia Tuono 1000R

Model: Aprilia Tuono 1000 R
Part: Brake fluid

Video tutorial

Today's main steps will show you how to bleed and refill the front brake fluid on an Aprilia Tuono 1000R motorcycle. First, place the motorcycle on a stand and begin by unscrewing the brake fluid bleed screw located on the front brake caliper.

Then, repeatedly squeeze the front brake lever to bleed all the fluid, as shown in the video. Next, unscrew the bolts of the brake fluid reservoir and refill it with new fluid, pressing the lever to circulate the fluid.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Change the Rear Brake Fluid in the Aprilia Tuono 1000 R
Change the Rear Brake Fluid in the Aprilia Tuono 1000 R
Tuono 1000 R In this guide, find the instructions to change the brake fluid of the Aprilia Tuono 1000 R motorcycle in simple steps. First, unscrew the bleed screw…
Replacing Front Brake Pads on Aprilia Tuono V4 1100 RR
Replacing Front Brake Pads on Aprilia Tuono V4 1100 RR
Tuono 1000 R In this video, learn how to remove and replace the front brake pads on an Aprilia Tuono 1100 RR by following these simple instructions. First, undo t…
How to replace the thermostat on the Aprilia Tuono 1000 R
How to replace the thermostat on the Aprilia Tuono 1000 R
Tuono 1000 R In today's tutorial, you will learn how to remove and replace the thermostat on the Aprilia Tuono 1000 R, following the instructions below. First, re…

Replacing the battery on a Kawasaki Z750

To change the battery on a Kawasaki Z750, remove the passenger seat section to access the rider's seat. Use an Allen key to unscrew the six screws securing the bracket underneath and move it to the side. Remove the battery from its housing and unscrew the terminals, starting with the positive terminal. Remove the old battery and replace it with a new one of the same size and specifications. Reattach the terminals, starting with the negative terminal, place the battery back in its housing, reposition the bracket and secure it with its screws, then reinstall both sections of the seat.

Watch the video!


by ScegliAuto

More videos