Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter on the Aprilia Storm 125, you need to loosen the screws that secure the left side cover, located just above the transmission. Once the bolts are loosened, you can remove the cover and access the screws that hold the filter in its housing. By unscrewing these bolts, you can remove the old filter and replace it with a new one; the new filter must be properly secured with the corresponding bolts, and then the side cover should be reattached.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Aprilia Storm 125
How to Replace the Air Filter on the Aprilia Storm 125
Storm 125 In this video tutorial, we will see how to disassemble and replace the air filter on the Aprilia Storm 125 scooter, following the instructions below.…
How to Change the Engine Oil on the Aprilia Storm 125?
How to Change the Engine Oil on the Aprilia Storm 125?
Storm 125 To change the engine oil on the Aprilia Storm 125, loosen the drain plug of the oil tank located at the central lower part of the bike: once this plu…
Replacing the Rear Brake Shoes on an Aprilia Storm
Replacing the Rear Brake Shoes on an Aprilia Storm
Storm 125 In this video tutorial, you will learn how to remove and replace the rear brake shoes on the Aprilia Storm 125 scooter. First, place the scooter on i…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos