Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Shoes on an Aprilia Storm

Model: Aprilia Storm 125
Part: Brake drums and shoes

Video tutorial

In this video tutorial, you will learn how to remove and replace the rear brake shoes on the Aprilia Storm 125 scooter. First, place the scooter on its centre stand and begin by removing the rear wheel by unscrewing the central bolt.

Then remove the wheel drum to access the brake shoes, as shown in the video. At this point, clean the brake plate and detach the spring to remove and replace the old shoes with new, high-quality ones; now reassemble the drum and the rear wheel!


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Aprilia Storm 125
How to Replace the Air Filter on the Aprilia Storm 125
Storm 125 In this video tutorial, we will see how to disassemble and replace the air filter on the Aprilia Storm 125 scooter, following the instructions below.…
How to Change the Engine Oil on the Aprilia Storm 125?
How to Change the Engine Oil on the Aprilia Storm 125?
Storm 125 To change the engine oil on the Aprilia Storm 125, loosen the drain plug of the oil tank located at the central lower part of the bike: once this plu…
How to Replace the Air Filter on the Aprilia Storm 125?
How to Replace the Air Filter on the Aprilia Storm 125?
Storm 125 To replace the air filter on the Aprilia Storm 125, you need to loosen the screws that secure the left side cover, located just above the transmissio…

How to Replace the Air Filter in a Moto Guzzi Nevada 750?

In this tutorial, you will see how to replace the air filter in a Moto Guzzi Nevada 750, a very simple and quick operation. First, wait for the engine to be completely cold, then remove the seat, disassemble the chrome air intake, and subsequently the panel located under the tank. Repeat the operation on the opposite side, disconnect both the fuel hoses and the pump connector, and remove the tank itself. At this point, you can move all the cables above the airbox, open it, and remove the old filter. To install the replacement and reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos