Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter of the Aprilia SXV 450?

Model: Aprilia Sxv 450
Part: Air filter

Video tutorial

To replace the air filter of the Aprilia SXV 450, first loosen the screws that secure the seat and then remove it. After removing the seat, you will also need to detach the side panels located on the sides of the bike, so that you can then remove the fuel tank.

This will also need to be disconnected before it can be completely removed; underneath all these components will be the air filter, which should be extracted from its housing and replaced with a new one. After the replacement, you can reassemble all the components removed earlier.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Sxv 450 In this video tutorial, you will see how to change the engine oil while performing the regular maintenance service on the Aprilia RXV and SXV 450, as…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos