Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on an Aprilia RS 125?

Model: Aprilia Rs 125
Part: Clutch

Video tutorial

To replace the clutch on an Aprilia RS 125, loosen the screws securing the clutch cover located on the left side of the bike, at the front. Once the screws are loosened, you can open it and access the clutch underneath.

The clutch can be removed from its housing by unscrewing the securing bolts. At this point, install the new clutch by securing it in its housing with the corresponding bolts.

This way, you can close everything up by securing the cover and checking that everything functions correctly.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Discs on the Aprilia RS 125
How to Replace the Clutch Discs on the Aprilia RS 125
Rs 125 This guide shows how to remove and replace the clutch discs on the Aprilia RS 125, following the instructions below. First, place the bike on a stand…
How to Start the Engine of an Aprilia RS 125
How to Start the Engine of an Aprilia RS 125
Rs 125 Before starting, position your Aprilia RS 125 on its central stand. Begin by inserting the key into the ignition switch and turning it fully clockwis…
Removing Water Pump on Aprilia RS 125
Removing Water Pump on Aprilia RS 125
Rs 125 In today's video, we will see how to remove the water pump and how to service it on an Aprilia RS 125 motorcycle, following these simple steps. First…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos