Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Aprilia Pegaso 650?

Model: Aprilia Pegaso 650
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Aprilia Pegaso 650, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then position a container underneath and remove the lower cover.

Next, locate the drain bolt, unscrew it using a 17mm socket, and allow all the oil in the system to drain out. Proceed to replace the filter, which is located on the right side of the engine, then reassemble everything and add the required amount of oil through the designated hole.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement for Aprilia Pegaso 650
Engine Oil and Oil Filter Replacement for Aprilia Pegaso 650
Pegaso 650 These brief steps illustrate the DIY procedure for performing routine maintenance by replacing the engine oil and oil filter on the Aprilia Pegaso 65…
How to Change the Engine Oil on an Aprilia Pegaso 660?
How to Change the Engine Oil on an Aprilia Pegaso 660?
Pegaso 650 To change the engine oil on an Aprilia Pegaso, loosen the drain plug located just below the gear lever. Once the plug is loosened, collect all the us…
How to Replace the Battery of the Aprilia Pegaso 650?
How to Replace the Battery of the Aprilia Pegaso 650?
Pegaso 650 You can replace the battery of the Aprilia Pegaso 650 by loosening the screws that secure the triangular cover panel immediately beneath the seat, on…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos