Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for Aprilia Pegaso 650

Model: Aprilia Pegaso 650
Part: Engine oil

Video tutorial

These brief steps illustrate the DIY procedure for performing routine maintenance by replacing the engine oil and oil filter on the Aprilia Pegaso 650 motorcycle. First, place the motorcycle on its centre stand and begin by removing the metal cover located under the engine by unscrewing the screws.

Next, unscrew the oil drain bolt and allow the oil to drain into a container for about ten minutes, as shown in the video. At this point, unscrew the oil filter cartridge and replace it with the new one, following the video until the end!


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on an Aprilia Pegaso 660?
How to Change the Engine Oil on an Aprilia Pegaso 660?
Pegaso 650 To change the engine oil on an Aprilia Pegaso, loosen the drain plug located just below the gear lever. Once the plug is loosened, collect all the us…
How to Change the Engine Oil in the Aprilia Pegaso 650?
How to Change the Engine Oil in the Aprilia Pegaso 650?
Pegaso 650 In this tutorial, you will see how to change the engine oil in the Aprilia Pegaso 650, a very simple and quick operation. First, wait for the engine …
How to Replace the Spark Plugs of the Aprilia Pegaso 650
How to Replace the Spark Plugs of the Aprilia Pegaso 650
Pegaso 650 Today, we will see in this video tutorial how to remove and replace the spark plugs of the Aprilia Pegaso 650 motorcycle, following these simple step…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos