Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs of the Aprilia Pegaso 650

Model: Aprilia Pegaso 650
Part: Spark plugs

Video tutorial

Today, we will see in this video tutorial how to remove and replace the spark plugs of the Aprilia Pegaso 650 motorcycle, following these simple steps. First, close the fuel tap and start by removing the plastic fairings on the sides of the fuel tank; then unscrew the securing screws of the tank to lift it and access the top of the engine, as well as the cylinder head.

At this point, remove the spark plug caps or connectors and use a socket wrench with an extension to unscrew and remove them, replacing them with new ones!


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Aprilia Pegaso 650?
How to Replace the Battery of the Aprilia Pegaso 650?
Pegaso 650 You can replace the battery of the Aprilia Pegaso 650 by loosening the screws that secure the triangular cover panel immediately beneath the seat, on…
How to Replace the Clutch on an Aprilia Pegaso 650?
How to Replace the Clutch on an Aprilia Pegaso 650?
Pegaso 650 You can replace the clutch on an Aprilia Pegaso 650 by loosening the screws that secure the cover on the right side of the bike. Once this cover is r…
How to Change the Engine Oil in the Aprilia Pegaso 650?
How to Change the Engine Oil in the Aprilia Pegaso 650?
Pegaso 650 In this tutorial, you will see how to change the engine oil in the Aprilia Pegaso 650, a very simple and quick operation. First, wait for the engine …

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos