Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow these steps to remove and replace the front headlight of the Aprilia Sportcity 250 scooter. First, place your scooter on the centre stand and begin by removing the front plastic fairing by unscrewing the fixing screws. Next, unscrew the additional screws of the front headlight and disconnect the electrical connector of the bulbs, as shown in the video. At this point, replace the bulbs or the entire optical unit if necessary; then reassemble the front headlight by applying the reverse procedure!

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Ignition Relay on an Aprilia Sportcity 250
How to Replace the Ignition Relay on an Aprilia Sportcity 250
Sportcity 250 In this brief and simple guide, you will learn how to disassemble and replace the ignition relay on the Aprilia Sportcity 250 scooter. First, place t…
Changing the transmission oil of the Aprilia Sportcity 250 ie
Changing the transmission oil of the Aprilia Sportcity 250 ie
Sportcity 250 Here are the necessary instructions to change the transmission oil of the Aprilia Sportcity 250 ie scooter, following these simple and quick steps. F…
Removing the Rear Wheel on the Aprilia Sportcity 250
Removing the Rear Wheel on the Aprilia Sportcity 250
Sportcity 250 In today's tutorial video, you will see the steps to remove the rear wheel from the Aprilia Sportcity 250 scooter, following the instructions below. …

How to Replace the Rear Indicator Bulb on the Sym Mio

To replace the rear indicator bulb on the Sym Mio, you need to loosen the screws that secure the rear fairing of the motorcycle: to do this, you will also need to open the under-seat compartment and loosen the screws that secure the fairing from the inside. Once it is released, you can completely detach it and disconnect the connector attached to the corresponding bulb. The bulb can now be extracted from its housing, allowing you to insert the new one: this way, you can reassemble all the removed parts to ensure everything works correctly.

Watch the video!


by ScegliAuto

More videos