Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace or Clean the Air Filter of the Aprilia Sportcity 125

Model: Aprilia Sportcity 125
Part: Air filter

Video tutorial

Below are the steps that will allow you to remove and replace (or clean) the air filter of the engine of the Aprilia Sportcity 125 scooter. First, place your scooter on the centre stand and start unscrewing the screws securing the air filter box cover; once removed, you can take out the filter cartridge, as shown in the video.

At this point, clean the filter with appropriate degreasers (or proceed directly with the replacement); refit the filter onto the filter box and finally install the cover!


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Remove the Transmission Cover of the Aprilia Sportcity 125
How to Remove the Transmission Cover of the Aprilia Sportcity 125
Sportcity 125 In this video tutorial, you will learn how to remove the engine cover on the transmission side of the Aprilia Sportcity 125 scooter by following thes…
Engine Oil Change on an Aprilia Sportcity
Engine Oil Change on an Aprilia Sportcity
Sportcity 125 In today's tutorial video, you will learn how to change the engine oil during the regular maintenance interval of an Aprilia Sportcity 125 scooter in…
How to Set the Clock on the Aprilia Sportcity 125?
How to Set the Clock on the Aprilia Sportcity 125?
Sportcity 125 To adjust the clock on the Aprilia Sportcity 125, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, pres…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos