Do it yourself
| ||||
|
Model: Aprilia Rs 125
Let's see the main steps necessary to disassemble and replace the gasket of the water pump housing of the Aprilia RS 125 motorcycle. First, we need to remove the side housing in order to access it. Then, unscrew the fastening screws of the water pump housing, disconnecting the coolant pipe and allowing it to drain into a container. At this point, unscrew the remaining screws of the housing to remove it, and then remove the old gasket. Clean the base of the housing and then install the new one, following the reverse procedure.
Posted on 8 October 2023 by ScegliAuto
|
Frequently Asked QuestionsHow do i replace the battery of the Royal Enfield Classic 350?The replacement of the battery of the Royal Enfield Classic 350 is carried out by loosening the screws that secure the casing located on the left side of the bike, immediately under the fuel tank. Once this has been opened, it will be possible to access the underlying battery: the latter must be released from its housing by disconnecting the power cables and unscrewing the fixing screws. After the old battery has then been removed from its housing, the new one can be inserted so that it can be connected and secured. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |