|
Do it yourself
| |||
| ||||
Model: Aprilia Rs 125
In today's tutorial, you will learn how to replace the coolant or antifreeze on the Aprilia RS 125 in simple, quick steps. First, unscrew the drain screw for the coolant located at the bottom near the water pump; let it drain into a container for about ten minutes. Next, open the radiator filler cap and pour in the new coolant of the correct type; fill to the maximum level and start the vehicle; allow the new fluid to circulate and top up if necessary!
Updated on 20 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Rs 125
Today, let's look at how to replace the gear oil and coolant of the Aprilia RS 125 motorcycle, following the instructions below. First, unscrew the o…
Rs 125
Discover the main steps in this guide that will allow you to remove and replace the front brake disc, as well as the pads, on the Aprilia RS 125. Fir…
Rs 125
Before starting, position your Aprilia RS 125 on its central stand. Begin by inserting the key into the ignition switch and turning it fully clockwis…
|
How to Dismantle the Engine of the KTM EXC 300
To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
