Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Aprilia
  4. : Mojito 50

Model: Aprilia Mojito 50
Part: Wheel

In order to replace the rear tire of the Aprilia Mojito 50, you need to loosen the screws that secure the rear wheel at the end of the swingarm: once these have been loosened, you can completely detach the wheel from its housing, using a lever. This way you can remove the tire from the rim and insert the new one; after the new tire has been properly inserted on the rim, it can be placed back on the swingarm. At this point, it will need to be secured with the appropriate screws that were removed earlier.

Posted on 12 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Mojito 125 To replace the air filter on an Aprilia Mojito 125, loosen the screws securing the cover of the box containing the air filter: this cover is located …
Mojito 125 To replace the battery on an Aprilia Mojito 125, you need to loosen the screws that secure the internal panel of the bike, located directly under the…
Tuareg 660 In this guide, we will provide instructions for removing and replacing the rear tyre on the Aprilia Tuareg 660. First, place the motorcycle on a stan…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos