Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil on the Aprilia Tuono V4, first warm up the engine to ensure the oil is fluid. Turn off the engine and lift the bike on a central stand to stabilize it. Locate the oil drain plug located on the lower side of the engine. Place an oil collection container under the plug. Use a wrench to unscrew the plug and let the used oil drain completely. Once the draining is complete, securely screw the drain plug back in. Find the oil fill cap on the engine housing and remove it. Using a funnel, slowly pour the correct amount of new motor oil, as specified in the user manual. Make sure to use the recommended oil for your bike. After pouring the oil, replace the fill cap and make sure it is closed properly. Start the engine and let it run for a few minutes to allow the oil to distribute in the engine. Turn off the engine and check the oil level with the dipstick. Make sure the level is within the correct range.

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on an Aprilia Tuono V4
How to Change the Engine Oil on an Aprilia Tuono V4
Tuono V4 1100rr To change the engine oil on an Aprilia Tuono V4, unscrew the bolts securing the lower protection plate of the bike to remove it and access the oil dr…
How to Change the Engine Oil in the Aprilia Tuono V4?
How to Change the Engine Oil in the Aprilia Tuono V4?
Tuono V4 1100rr In this tutorial, we will see how to change the engine oil in the Aprilia Tuono V4, a very simple and quick operation. First, wait until the engine i…
How to Change the Engine Oil in an Aprilia Tuono V4?
How to Change the Engine Oil in an Aprilia Tuono V4?
Tuono V4 1100rr In this tutorial, you will see how to change the engine oil in an Aprilia Tuono V4, a very simple and quick operation. Before proceeding, ensure that…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos