Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the serpentine belt of the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: V-belt

Today we will see the instructions that will allow us to disassemble and replace the serpentine belt of the Audi A3, in simple and quick steps. First, lift the vehicle and start by disassembling and removing the front right wheel; then use a wrench to loosen the tensioner, removing the serpentine belt as shown in the video. At this point, install the new serpentine belt, as well as the original one, inserting it perfectly between the various pulleys; rotate the engine by hand to ensure correct insertion, finally reassembling the wheel!

Posted on 9 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing belt of an Audi A3?
How to replace the timing belt of an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) Good morning, today's goal is to replace the timing belt of our Audi A3. Let's start by opening the front hood and removing the air filter system. Th…
How to Replace the Car Serpentine Belt
How to Replace the Car Serpentine Belt
Audi A3 (2003-2013 / MK 2, 8P) The following guide shows how to replace the serpentine belt on your car without needing to call in an external professional. Purchasing it online ca…
Guide to replacing the timing belt of the Audi A3 1.6 TDI.
Guide to replacing the timing belt of the Audi A3 1.6 TDI.
Audi A3 (2012-2019 / 8V, MK 3) The main instructions today will show us how to dismantle and replace the timing belt and water pump of the Audi A3 1.6 TDI, as well as the Volkswage…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos