Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the roof lining of an Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Convertible top

Today we will explain how to replace the roof lining of an Audi A4 car. We start by removing the interior light, using a flat-tip screwdriver to remove it. After removing the interior light, we proceed to remove the roof lining. To remove the roof lining, we use plastic levers. We disconnect the roof connector and slide out the entire headliner. Before inserting the new lining, we remove the old one. With a metal brush, we remove the glue and then apply the first layer of the new fabric glue. We glue the new fabric and assemble the roof and the interior light.

Posted on 24 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake servo sensor on an Audi A4 B9
How to replace the brake servo sensor on an Audi A4 B9
Audi A4 (2014-2024 / B9) In this video, we see how to replace the brake servo sensor on an Audi A4 B9: this is a component that detects the pressure applied to the brake peda…
How to replace the battery of the key remote control of an Audi A4
How to replace the battery of the key remote control of an Audi A4
Audi A4 (2014-2024 / B9) To replace the battery of the key remote for an Audi A4 car, you will not need any special tools other than a new battery. Take the remote and press …
How to replace the third brake light on the Audi A4
How to replace the third brake light on the Audi A4
Audi A4 (2000-2004 / B6) Today's steps will show us how to disassemble and replace the third brake light on the Audi A4. First, we open the rear trunk door and start removing…

    Frequently Asked Questions

    • A4 2007-2016 - I have a problem with the soft top of my Audi A4 convertible, can anyone help me? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos