Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Logo Bulbs in an Audi A3 Door

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Interior dome light bulb

This video demonstrates how to replace the logo bulbs in an Audi A3 door. Use a screwdriver to pry between the spotlight and the door panel (without damaging the panel), pull the spotlight out of the panel and disconnect the power connector. Replace the damaged spotlight with a new one (same size and voltage). Refit the spotlight into its housing (press it in with your hands until the clips are fully engaged). Repeat the same process for the spotlight in the other doors. Finally, test the correct operation of the lights.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the door lock of the Audi A3.
How to replace the door lock of the Audi A3.
Audi A3 (2012-2019 / MK 3, 8V) Replacing the lock of the left front door of the Audi A3 is a simple and quick operation that can be done independently. To carry out the replacement…
How do you remove the external handle of the Audi A3?
How do you remove the external handle of the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) The removal of the external handle of the Audi A3 is done by opening the door, so that access to its side screw can be obtained: this must therefore …
Air filter replacement for Audi A3.
Air filter replacement for Audi A3.
Audi A3 (2012-2019 / MK 3, 8V) Let's see how to proceed to replace the air filter of the Audi A3. Open the engine hood and release the plastic cover with the Audi logo, using plier…

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos