Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How we disassemble the rear bumper on Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Rear bumper

How do we disassemble the rear bumper on Audi A4? Let's see how to proceed together, a not too complex operation if you proceed in order: we open the luggage compartment, take a Phillips screwdriver and a socket wrench, then, remove the rear lights of the car, unscrew the screws around the perimeter of the bumper. After having also unscrewed the screws located in the lower part of the trunk lining, we unscrew the tightening screws in the lower part of the bumper (between the frame and the bumper). Once the bumper is free from any screws or pins, let's grab it with your hands and pull it off the body.

Posted on 9 July 2019 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of an Audi A4
How to remove the rear bumper of an Audi A4
Audi A4 (2004-2008 / B7) How to remove the rear bumper of an Audi A4? Let's see how to proceed together, a not too complex operation if you proceed in order: first of all wit…
How to Remove the Rear Bumper of an Audi A4
How to Remove the Rear Bumper of an Audi A4
Audi A4 (2000-2004 / B6) How do you remove the rear bumper of an Audi A4? Follow these steps for a straightforward process. First, open the trunk, grab a Phillips screwdriver…
How to remove the rear bumper in the Audi A4 ??
How to remove the rear bumper in the Audi A4 ??
Audi A4 (2007-2016 / B8) In this tutorial we can see how to disassemble the rear bumper in the Audi A4. First of all, unscrew the Torx screws located inside the wheel arches,…

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos