Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bumper on the Audi A4?

Model: Audi A4 B9 - Years 2014-2024
Part: Rear bumper

In this tutorial we can see how to remove the rear bumper on the Audi A4, a very simple and fast operation. First of all, we open the trunk, then we remove the plastic covers along the inner edges of the headlights, unscrew the bolts just released with a Torx T25 key and remove the headlights themselves. We then lift the vehicle, unscrew all the bolts on both the lower edge of the bumper and inside the wheel arches and continue by removing the various plastic rivets indicated. At this point, all that remains is to pull the bumper outwards and unhook it from the frame.

Posted on 11 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of an Audi A4
How to Remove the Rear Bumper of an Audi A4
Audi A4 (2000-2004 / B6) How do you remove the rear bumper of an Audi A4? Follow these steps for a straightforward process. First, open the trunk, grab a Phillips screwdriver…
How to Remove the Rear Bumper on the Audi A4
How to Remove the Rear Bumper on the Audi A4
Audi A4 (2007-2016 / B8) In this tutorial, you will see how to remove the rear bumper on the Audi A4. First, remove the Torx screws located inside the wheel wells, 3 on each …
How to Remove the Rear Bumper from an Audi A4
How to Remove the Rear Bumper from an Audi A4
Audi A4 (2007-2016 / B8) To replace the rear bumper on an Audi A4, access the underside of the bumper to loosen the three screws underneath. Once these are removed, you can a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos