Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper from an Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
Video tutorial

To replace the rear bumper on an Audi A4, access the underside of the bumper to loosen the three screws underneath. Once these are removed, you can also unscrew those located inside the two rear wheel wells.

At this point, open the trunk and remove the two inner covers corresponding to the taillights: this will allow you to loosen the screws underneath by pulling the taillights from their housings. Only now will you be able to detach the bumper.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Audi A4 (2000-2004 / B6) Follow this guide for instructions on how to remove and replace the rear bumper of the Audi A4 in simple and quick steps. First, move to the rear of …
Audi A4 (2004-2008 / B7) How to remove the rear bumper on Audi A4? Follow these steps for a straightforward operation: open the trunk, grab a Phillips screwdriver and a socke…
Audi A4 (2004-2008 / B7) How to remove the rear bumper of an Audi A4? Follow these steps to proceed, a task that is not too complex if done in order: First, use a screwdriver…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos