Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Rear bumper

See other generations:
Video tutorial

Follow this guide for instructions on how to remove and replace the rear bumper of the Audi A4 in simple and quick steps. First, move to the rear of the vehicle and open the trunk.

Then, remove the screws from the taillight, disconnecting the electrical connector to take it out, as shown in the video. Next, unscrew the bolts located on both sides of the wheel wells and above the bumper until you can detach and remove it completely; then, install the new rear bumper by reversing the procedure!


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of an Audi A4
How to Remove the Rear Bumper of an Audi A4
Audi A4 (2004-2008 / B7) How to remove the rear bumper of an Audi A4? Follow these steps to proceed, a task that is not too complex if done in order: First, use a screwdriver…
How to Remove the Rear Bumper on Audi A4
How to Remove the Rear Bumper on Audi A4
Audi A4 (2004-2008 / B7) How to remove the rear bumper on Audi A4? Follow these steps for a straightforward operation: open the trunk, grab a Phillips screwdriver and a socke…
How to Remove the Rear Bumper from an Audi A4
How to Remove the Rear Bumper from an Audi A4
Audi A4 (2007-2016 / B8) To replace the rear bumper on an Audi A4, access the underside of the bumper to loosen the three screws underneath. Once these are removed, you can a…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos