Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Wheel Bolt Cover on the Audi A4

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Wheel

See other generations:
Video tutorial

Let's briefly see how to remove the wheel bolt cover or cap so you can take off and replace the wheel if necessary on the Audi A4, as well as on other models from the manufacturer. The bolt cover has a hole for extraction; use something sharp to pry it off, as shown in the video.

Perform the same procedure on all wheels if necessary; now you can proceed with replacing the wheels or tires, finally securing the cover by hand on all wheels.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

Audi A4 (1994-2000 / B5) Removing the wheel from an Audi A4? Let's see how to remove the wheel if it's damaged. Open the trunk and take the wheel removal kit, which includes:…
Audi A4 (1994-2000 / B5) How do you remove a damaged wheel on an Audi A4? Let's see how to take off the damaged wheel. Open the trunk and grab the wheel removal kit, which in…
Audi A4 (2007-2016 / B8) To remove the inner panel of the trunk lid on an Audi A4, open the trunk itself to access the coverings of the lift supports that hold up the trunk. …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos