Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the inner panel of the rear tailgate of the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Checks and maintenance

In order to remove the inner panel of the rear tailgate of the Audi A4, you need to open the tailgate itself, so that you can remove the coverings of the special pistons that lift the tailgate; then you can detach the coverings of the pins at the base of the panel and at the base of the lock actuator. Then you will need to remove the triangle, loosening the screws underneath along with those at the bottom of the panel: once all these screws have been loosened, it will be possible to completely detach the old panel, replacing it with a new one.

Posted on 16 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear tailgate handle of the Audi A4 B7
How to disassemble the rear tailgate handle of the Audi A4 B7
Audi A4 (2004-2008 / B7) In this video we see how to remove the rear hatch handle of the Audi A4 B7: first we need to remove the inner lining of the hatch, which is only pres…
How to Open the Trunk on Audi A4 with a Dead Battery
How to Open the Trunk on Audi A4 with a Dead Battery
Audi A4 (2007-2016 / B8) How to open the trunk of your Audi A4 if the key battery is dead or broken? Let's see how to open the rear hatch. Open the rear door of the car and r…
How to open the locked tailgate on the Audi A4?
How to open the locked tailgate on the Audi A4?
Audi A4 (2007-2016 / B8) In the Audi A4, it can happen that the trunk hatch gets locked, for example due to a malfunction of the control button or the lock actuator. In these…

    Frequently Asked Questions

    • A4 2007-2016 - How does the navigation system of my Audi A4 work? Read answer
    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos