Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the low beam bulbs in the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Headlight bulb

In this tutorial, we can see how to replace the low beam bulbs in the Audi A3, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the hood, locate the large circular cap located on the back of the headlight in question, and remove it. Next, grab the bulb holder, rotate it 90 degrees counterclockwise and remove it from the housing. At this point, we can disconnect the old bulb, connect the replacement without touching it directly with bare hands, and reassemble everything following the reverse procedure.

Posted on 3 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped Headlight Bulbs in an Audi A3?
How to Replace the Dipped Headlight Bulbs in an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In this video, see how to replace the dipped headlight bulbs in the Audi A3. To do this, first remove the bumper, as access to the rear of the headli…
How to Replace the Front Headlight Bulbs on an Audi A3
How to Replace the Front Headlight Bulbs on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How to replace the front headlight bulbs on an Audi A3? Open the front bonnet by pulling the lever located at the bottom right of the dashboard and s…
Removing the Headlight Bulb of an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to remove the headlight bulb of an Audi A3? Lift the front bonnet to access the front headlights and replace the bulbs. Remove the plastic cover …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos