Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Disc and Pad Replacement

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Brake rotors

Lift the vehicle securely. Remove the wheel by unscrewing the bolts. Remove the return spring of the pads and then take out the retainers. Unscrew the two retaining screws of the caliper with a ratchet wrench and move it away. Remove the caliper support bolts and take it off. Unscrew the disc screws and forcefully remove it from its seat. Clean all brake components from debris. Install the new disc and clean it. Thoroughly clean the caliper, piston, and caliper support. Reattach the caliper support. Install the new pads, ensuring the correct orientation and placing the one with the electrical contacts facing inward. Check the wear condition of the retainers and the piston. Grease the mounting pins and reposition the piston, ensuring proper operation. Carefully reattach the caliper and springs. Ensure the pads fit perfectly against the disc. Reset the position of the pistons by pressing the brake pedal.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Brake Disc and Pad Replacement
Rear Brake Disc and Pad Replacement
Audi A6 (1997-2004 / MK 2, C5) Lift the vehicle on a lift and remove the wheel corresponding to the repair area. Remove the mounting pins of the brake caliper located at the rear a…
Replacing Rear Brake Pads
Replacing Rear Brake Pads
Audi A6 (2004-2012 / MK 3, C6) Replacing the brake pads is a fairly simple task. For the rear brake, compared to the front, it requires removing the wheel for better access. The pr…
Brake Pad Replacement
Brake Pad Replacement
Audi A6 (2004-2012 / MK 3, C6) The following guide outlines a simple and useful method to replace the brake pads on your car, with a bit of free time and patience. First, remove th…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos