Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Audi A3.

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Today's instructions will allow us to remove and replace the headlight bulb of the Audi A3 in a few simple steps. First, to access the low beam bulb of the vehicle, you need to reach it through the wheel arch by removing the inner plastic cover of the headlight.

Then, disconnect the electrical connector of the bulb and detach the xenon control unit from the light, as shown in the video. At this point, install the new low beam bulb, ensuring it has the same fitting.

Check the light's functionality and finally reattach the plastic cover.


Posted on 1 December 2025 by ScegliAuto


Related tutorials

How to replace the front turn signal bulb of the Audi A3
How to replace the front turn signal bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the front turn signal bulb on an Audi A3 model 8p. To perform the bulb replacement, we need to open the front ho…
How to Replace the Headlight Bulb on an Audi A3
How to Replace the Headlight Bulb on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today, learn how to replace the right front headlight bulb on an Audi A3 model 8P. Before replacing the bulb, remove the front bumper to allow the he…
Replacing the Headlight Bulb of the Audi A3
Replacing the Headlight Bulb of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Let’s discover the steps that will allow us to remove and replace the headlight bulb of the Audi A3. To access the headlight bulb, it will be necessa…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos