Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the OBD2 Port on the Audi TT 3

Model: Audi Tt MK 3, 8S - Years 2014-2023
Part: Checks and maintenance

Locating the OBD2 port inside your Audi TT third generation is not complicated; in fact, by following these steps, you will find it in just a few seconds. First, get inside the car and make sure it is completely off, then shift your attention to the lower area of the dashboard to locate the OBD2 port you were looking for. Now that you know where it is, you can connect a compatible diagnostic tool to your Audi TT Mk3 and analyze all the errors detected by the control unit.

Posted on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi Tt (2006-2014 / MK 2, 8J) Today's main steps will allow us to reset the service light for the routine maintenance of the engine oil change of the Audi TT. First, we get into t…
Audi Tt (1998-2006 / 8N, MK 1) To find the box containing all the various fuses for your Audi TT 8n, you must follow the steps described in the following guide. Before starting, ma…
Audi Tt (1998-2006 / 8N, MK 1) If the fuel cap of our Audi TT gets stuck and we can't refuel, it's a big problem. Fortunately, Audi engineers have thought of this possibility and h…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos