Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Exhaust on an Audi A3?

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Exhaust muffler

See other generations:
Video tutorial

You can replace the exhaust on an Audi A3 by lifting the car using a ramp to access the components underneath the chassis. First, free the entire exhaust pipe from the bolts securing it to the appropriate supports.

Then, begin by disconnecting the exhaust manifold from the rear of the engine; proceed by removing the catalytic converters and silencers, thus removing the initial part of the exhaust pipe and the corresponding tailpipe. You can now insert all the new components of the exhaust system and check their operation.


Posted on 27 June 2026 by ScegliAuto


Related tutorials

Audi A3 (2003-2013 / 8P, MK 2) Today, follow the main steps for removing and replacing the turbocharger on the Audi A3 2.0 TDI. First, raise the vehicle and disconnect the exhaust …
Audi A3 (2003-2013 / 8P, MK 2) The exhaust manifold connects the car's engine to the exhaust. Replacing an old manifold can lead to a significant increase in engine power. It is no…
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3 8V, the turbo exhaust gas pressure sensor is located inside the engine bay on the driver's side. As seen in the attached video, to acc…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos